If a fingertip clip reads 98%, what does a pulse oximeter measure? The percentage estimates how fully the hemoglobin in arterial blood is loaded with oxygen. It does not tell you how much hemoglobin is available to carry oxygen. That is why two people can have the same reading even when one has anemia and carries much less oxygen in each unit of blood.
The percentage on the display is usually labeled SpO2. It is an estimate of arterial oxygen saturation, the fraction of hemoglobin's oxygen-binding sites occupied by oxygen. Hemoglobin is the protein in red blood cells that carries most of the oxygen in the blood. A reading of 98% means the device estimates that about 98 out of every 100 available sites are occupied. It does not tell you how many sites there are in a given volume of blood.
The clip shines red and infrared light through the fingertip. Oxygenated and deoxygenated hemoglobin absorb these wavelengths differently. With each heartbeat, the amount of arterial blood in the fingertip changes slightly. The oximeter uses the part of the light signal that changes with the pulse to estimate arterial saturation. The FDA's guide to pulse oximeters explains how to interpret the reading and what can affect its accuracy.
A device may also display a pulse rate. That number counts beats per minute. It does not tell you how much blood the heart pumps with each beat, just as the saturation percentage does not tell you how much hemoglobin is in the blood.
Anemia involves too few healthy red blood cells or too little hemoglobin. A pulse oximeter does not measure hemoglobin concentration. A blood test called a complete blood count, or CBC, includes that measurement. The National Heart, Lung, and Blood Institute's overview of anemia explains why hemoglobin matters for carrying oxygen to the body.
Imagine two buses with different numbers of seats. On a bus with 100 seats, 98% occupancy means 98 passengers. On a bus with 50 seats, 98% occupancy means 49 passengers. The occupancy rate is the same, but the smaller bus carries half as many people. In the blood, the seats are oxygen-binding sites and the passengers are oxygen molecules. With less hemoglobin in a given volume of blood, there are fewer seats to fill.
For a calculation, compare two hypothetical arterial blood samples with the same true oxygen saturation of 98%. One contains 15 grams of hemoglobin per deciliter of blood and the other contains 7.5 grams per deciliter. Because the second sample has half the hemoglobin concentration, it carries half as much hemoglobin-bound oxygen per deciliter. A small amount of oxygen also dissolves directly in the blood, so the calculation is not saying that the second sample has exactly half the total oxygen content. The two hemoglobin values are examples for the arithmetic, not diagnostic cutoffs.
Nothing in this example requires the oximeter to be wrong. If the lungs load oxygen onto nearly all the available sites, saturation can be high even when the number of sites is low. A normal reading therefore cannot rule out anemia.
Oxygen content describes how much oxygen is in a given volume of blood. Oxygen delivery describes how much oxygen the blood brings to tissues per unit of time. To go from content to delivery, you also need to know how much blood is flowing.
Oxygen delivery to the body = arterial oxygen content × cardiac output
Cardiac output is the volume of blood the heart pumps per minute. If you write oxygen content in milliliters of oxygen per liter of blood and cardiac output in liters of blood per minute, the liters cancel. You get milliliters of oxygen delivered per minute. A saturation percentage alone cannot give you that result.
If cardiac output stays the same while arterial oxygen content falls, oxygen delivery falls. But cardiac output does not always stay the same. In anemia, the body can partly compensate by increasing blood flow. How much oxygen actually reaches a particular tissue also depends on how much of that flow goes to it. The fingertip percentage cannot show how much compensation is happening or whether it is enough.
Suppose a case describes someone who tires easily and has an SpO2 of 98%. A classmate says, “That rules out a problem with oxygen transport.” The flaw is not that 98% must be inaccurate. It is that the classmate is asking the percentage to answer a question it cannot answer. The reading tells you about how full the binding sites appear to be, not how many there are. Fatigue alone does not establish the cause, either.
If the case then gives a low hemoglobin concentration, you have evidence for reduced oxygen-carrying capacity. You still cannot calculate oxygen delivery from those two results alone. If someone claims the heart is delivering a specific amount of oxygen each minute, look for cardiac output and enough information to determine arterial oxygen content.
This distinction is useful when working through medical cases in the IMedC training and practice problems. For more physiology reading, see the Medicine Explained articles.
Try changing one fact in the practice case: keep hemoglobin and saturation fixed, but reduce cardiac output by half. Oxygen content per liter stays the same. The amount delivered per minute is cut in half, even if the displayed saturation does not change.
Can my oxygen saturation be 98% if I have anemia?
Yes. Most of your hemoglobin's oxygen-binding sites can be filled even when you have less hemoglobin than usual.
What test measures how much hemoglobin I have?
A complete blood count includes hemoglobin concentration, which is the amount of hemoglobin in a given volume of blood.
Does the pulse rate tell me how much blood my heart pumps?
Not by itself. You also need to know how much blood the heart pumps with each beat.
About the International Medicine Competition: an online medicine competition for high school students from around the world. Qualification Round 2027: submissions are open until Sunday, 7 February 2027. How the rounds work